The Sonel MIC-2511 is a special tool used to check how well things can stop electricity from flowing through them. It's like a meter that measures how good things are at staying electrically safe. This meter can test things with a strong push of electricity, up to 2500 volts. It comes in a strong case that's tough and can protect it from things like dust and water. The meter doesn't use up much battery power and can even be charged while it's being used. This meter is really handy and can be used in many places. It's great for checking big machines, wires, and even the lights on the streets. People who work with electricity, like electricians, really like this meter because it helps them make sure things are working right and safe. It's also good for checking things when buildings are being built, like solar panels on roofs. This meter is helpful for people who set up communication networks and heating systems too. It makes it easy to check if special pipes that carry hot stuff are working okay. The product was developed to fully or partially meet the standards: IEC 61340-2-3 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation IEC 61340-4-1 Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors IEC 61340-4-3 Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear IEC 61340-4-5 Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person IEC 61340-4-6 Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps IEC 61340-4-7 Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization IEC 61340-4-9 Electrostatics - Part 4-9: Standard test methods for specific applications - Garments IEC 61340-5-1 Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements IEC TR 61340-5-2 Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide IEC 61340-5-3 Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices IEC 62631-3-1 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method HD 60364-6 Low-voltage electrical installations - Part 6: Verification IEC 1081 Pneumatic instruments driven by associated process gas - Safe installation and operating procedures - Guidelines Feature Here are the special things that the Sonel MIC-2511 can do: It can measure the power of electricity from a little bit to a lot - from 10 volts to 2500 volts. You can choose the amount of electricity you want to use, like 10 volts, 25 volts, and so on. It's also good at checking how well the fire alarm system's special loop works with 10 volts of electricity. While doing measurements, it can make charts on its screen to show the results. It works even in places where electricity can be dangerous, like places where it can damage sensitive equipment. It can correct its results to a standard temperature so that the measurements are accurate. You can keep looking at the numbers it shows for how well electricity is stopped, or for any tiny leaks of electricity. When it's done measuring, it can automatically get rid of any leftover electricity in the thing being tested. It can make sounds every five seconds to help keep track of time. It can measure time for different things, like how fast something can hold electricity. It can measure times called T1, T2, and T3 for different calculations. It can also check different types of wires to see how well they can stop electricity, using a special adapter. While measuring, it can show you how strong the electricity is that it's using. It uses a very small amount of electricity for measuring. It's designed to keep you safe by not measuring things that have electricity running through them. It can measure the insulation (safety) of something using either two or three wires. Technical Uses and application The meter is useful for checking how well things can stop electricity using strong electricity up to 2500 V. When checking cables, it automatically gets rid of any leftover electricity after measuring. When used with the PRZ-2 kit, it becomes a complete tool for technicians who work with protecting machines from static electricity. This device can safely check homes, stores, and big factories to make sure the electricity is okay. It can also make measurements automatic with the AutoISO-2511 adapter, which can test different cables without changing anything.The MIC-2511 lets you see if things that protect from electricity are working, and if things that connect to each other are safe. It can even measure the strength of electricity, both from the wall and from batteries, up to 1500 V. This meter can store a lot of measurements, almost 10,000, and you can send them to a computer.